Thunderhead Engineering Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Forum moved to https://forum.thunderheadeng.com

Author Topic: Meshing Problem  (Read 401 times)

anger_666

  • New Member
  • *
  • Posts: 3
    • View Profile
Meshing Problem
« on: July 05, 2021, 06:15:56 am »

Hello Guys,

I want to ask a questions for you about PyroSim. After finish my car-lot design, meshing seems ok. But after starting analysis the error is occurred. For ex: "Vent 25 must be attached to a solid obsturction."
The problem is how can I find the Vent 25. Because I changed the name. After changing the name there is no vent25 in my project.
Thanks.
Logged

b2

  • New Member
  • *
  • Posts: 5
    • View Profile
Re: Meshing Problem
« Reply #1 on: October 13, 2021, 05:25:08 am »

hello i have also the same problem when i start the analysis the program show me

open, mirror, or periodic vent 1 must be an exterior boundary.
 i dont what i have to do from where
Logged

Tomasz

  • New Member
  • *
  • Posts: 9
    • View Profile
Re: Meshing Problem
« Reply #2 on: October 21, 2021, 03:17:49 am »

In such a situation, I simply counted all the valves one by one - in the project tree - and then I tracked which valve was the problem
Logged

Bryan Klein

  • Thunderhead
  • *****
  • Posts: 151
    • View Profile
    • Thunderhead Eng. Site
Re: Meshing Problem
« Reply #3 on: October 27, 2021, 12:06:56 pm »

It should be the 25th Vent down from the top of the FDS input file.
Logged