Thunderhead Engineering Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Forum moved to https://forum.thunderheadeng.com

Author Topic: Occupants ignoring one of the exist stairs  (Read 498 times)

nabil.mahmoud.mohamed

  • New Member
  • *
  • Posts: 1
    • View Profile
Occupants ignoring one of the exist stairs
« on: June 03, 2021, 02:58:21 am »

Dear all,
I have newly learnt pathfinder and i,m facing a problem which is summarized in the following scenario:
Occupants choose 2 out of 3 stairs to escape through so they take longer time to evacuate, please provide closure on what could be the potential cause of this?
Thanks
Logged

dilip

  • New Member
  • *
  • Posts: 1
    • View Profile
Re: Occupants ignoring one of the exist stairs
« Reply #1 on: July 07, 2021, 10:13:58 am »

It's hard to say what may be the potential cause without seeing the simulation but I have recently run into similar problems.

I had a staircase and an escalator (which is just the staircase object in Pathfinder but with a constant speed) right beside each other. To utilize the constant speed setting for the escalator, you have to set the direction of the escalator (which is a stair object).

I had the escalator set to +X while the adjacent stair had no restriction on direction. With this setup, occupants would only utilize the stair for some reason when really, they should have been using both stair and escalator. I tried changing steering mode parameters related to door choice but this didn't help.

The fix I used was to set both the stair and escalator to +X. Once I did that, occupants utilized both. I'm not sure if this is a glitch or not. If only one is set to +X, occupants should still be able to use it. Regardless, setting both to +X solved my problem.
Logged