Thunderhead Engineering Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Forum moved to https://forum.thunderheadeng.com

Author Topic: Convert cad lines into walls  (Read 2044 times)

ignat911

  • New Member
  • *
  • Posts: 5
    • View Profile
Convert cad lines into walls
« on: January 17, 2014, 08:26:21 am »

By default, when you convert CAD lines installed in the wall height 2.75. How to set a different height?
Logged

Richard O'Konski

  • Thunderhead
  • *****
  • Posts: 28
    • View Profile
Re: Convert cad lines into walls
« Reply #1 on: January 17, 2014, 09:36:15 am »

After you've converted the lines into walls, the resulting walls should be selected. You can edit the height in the object properties. To do so, perform these steps:

  • Right-click the resulting wall(s) either from the Model View (the main 3D/2D view) or the Navigation View (the tree on the left).
  • Select Properties... from the right-click menu.
  • Go to the Geometry tab.
  • Enter the new height in the Height field.

Richard O'Konski
Thunderhead Engineering
Logged
Richard O'Konski
Thunderhead Engineering

ignat911

  • New Member
  • *
  • Posts: 5
    • View Profile
Re: Convert cad lines into walls
« Reply #2 on: January 17, 2014, 10:21:00 am »

Thanks, but to change the height of a large Number of walls will take a long time if you change the height of each wall. Is it possible to change the default height of 2.75 at the beginning? that would immediately all the walls were tall as 4 meters?
Logged