Thunderhead Engineering Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Forum moved to https://forum.thunderheadeng.com

Author Topic: Scenario with a caracteristic fire load.  (Read 3227 times)

Xoano

  • New Member
  • *
  • Posts: 6
    • View Profile
Scenario with a caracteristic fire load.
« on: September 22, 2009, 09:39:10 am »

Hello,

I would simulate an scenario with a caracteristic fire load (MJ/m2) and the materials simulated into the scenario have a known heat release rate (kW/m2) or a mass loss rate (kg/m2┬Ěs). I tried 3 forms to solve this:

1) Place objects over all the surface of the scenario, for example cubes of 0,25x0,25x0,25 and introduce the thermal properties of this material (density, conductivity & specific heat)
Here I saw two ways to modelize this...

    1a) Govern the reaction by material: Introducing the pyrolisis reaction of the material. But it was difficult to obtain it...
    1b) Govern the reaction manually: Introducing the HRR or the mass loss rate, and ignition temperature.
         I prefered use this option, but in a large scenario the flame doesn't spread to the objects which are next to the initial burn vent and the objects over the burn. I don't know if that is consequence of not getting the needed temperature to begin the ignition of the objects near to the initial burn...

2) The other way I tried was place a vent on the total surface of the scenario, specifing the heat release rate according to a normal t-square curve customized in order to burn the total fire load (caracteristic fire load (MJ/m2) x area (m2)), and specifing the spread rate in the vent of the burner.

I compared the 2) option with zone models and they are similar... But I would solve the problems with my 1b) option...

What do you think about this?
Somebody could help me?
Thanks.

Xoano
Logged

Charlie Thornton

  • Thunderhead
  • *****
  • Posts: 851
    • View Profile
Re: Scenario with a caracteristic fire load.
« Reply #1 on: September 24, 2009, 07:38:47 am »

Xoano,

Just to make sure I understand, the trouble you're having is that your burner vent doesn't seem to be igniting your flammable materials?  If you could post a model we might be able to identify the problem.

- Charlie
Logged