Thunderhead Engineering Forum

Public Forum => PyroSim => Topic started by: roborob on September 02, 2021, 02:59:04 am

Title: Automatic FED Slice
Post by: roborob on September 02, 2021, 02:59:04 am
In Smokeview it creates an FED 2D slice automatically at 11.25m when I add the following lines:

&SLCF QUANTITY='VOLUME FRACTION', SPEC_ID='CARBON DIOXIDE', PBZ=11.25/
&SLCF QUANTITY='VOLUME FRACTION', SPEC_ID='CARBON MONOXIDE', PBZ=11.25/
&SLCF QUANTITY='VOLUME FRACTION', SPEC_ID='OXYGEN', PBZ=11.25/

Apparently smokeview calculates this. But I did some tests and it seems like this is not possible in Pyrosim results. Is this correct?

Thanks.